[iPhone app] iFlashReady

2009-03-27_191325.jpg

APP STORE連結

因為對Night Camera(app store連結)的不滿意,回頭去看了review。
發現不只是我這樣覺得,還有很多人都這樣說:「一點都沒有差別!!甚至原來相機的表現更好!!」,所以我又買了iFlashReady。

單藍我也有去看一下review先。

處理前:

20090326_153342.jpg 20090326_153342.jpg 20090326_153342.jpg

處理後:

20090326_200559.jpg 20090326_200559.jpg 20090326_153342.jpg

真是太糟了。

看到這張圖(放在flickr的中圖尺寸)出來,我的心都涼了…

可以退貨嘛?

Remark:

1. 編輯過後,位置座標會不見。這一點我再購買前就有從review裡看到了,不過我不是很在意座標這件事,就沒管它。事實上,編輯過後會讓exif消失的app也不是只有這一個。

2. iFlashReady不像Night Camera可以直接拍攝。它只有把照片叫出來修改的功能而已。藍厚,修改只能選三段,低,中,高,這樣。

3 回應 to “[iPhone app] iFlashReady”

  1. DDT Says:

    這麼爛的東西,還留著幹嘛?
    換台高動態範圍的相機卡實在啦。

  2. angie Says:

    哀哀相機不能拿來一起比啦

  3. iFlashready developer Says:

    Hi, the grainy output is caused by Apple/iPhone’s jpeg compression. If you take the photo by iPhone camera, the photo is 1600×1200. However, if you transfer the photo to iPhone by iPhoto, it reduces the size and also compress it aggressively. That compression will introduce artifacts and therefore a local dynamic range algorithm like iFlashready will enhance the artifacts as details.

    So, since iFlashready is mainly build for iPhone camera, please either use the 1600×1200 source image, or try to email yourself the 1600×1200 source image, open the email in iPhone, and save it.

    If you use iPhoto, and iphone sync, the artifacts from compression can not be avoided. We filed this issue as a bug to Apple before. iPhone OS 2.0 was behaving really bad, iPhone OS 2.2 works slightly better but the bug is still there in iPhoto.


發表迴響